Latest Contributions by LarryWiebe

‎03-08-2022

Hi Phil, Attached is a very basic form that will demonstrate the issue I'm having... Although, I tried to create this completely in 3.14, I could not get it to work publishing from Connect 3.14. So I published in 3.13 and the used the 3.14 Windows and iOS clients to test the issue... To recreate: publish the survey with Inbox enabled populate a record with more than 1 entries in the repeat and Send the survey open the survey from the Inbox and step to the second repeat record, the name will be displayed in red instead of the label for the Photo Type. Let me know if there is more I can help with to figure this out... Thanks, Larry

‎03-04-2022

I have hit a new issue with 3.14 where an select_one appearance autocomplete from an external choice list inside a repeat in a survey from the Inbox will show the proper label for the first record in the repeat, but shows the name for the subsequent records in the repeat. It highlights the name in red italics to indicate a wrong entry, but it is not an error and behind the scene everything keep working including other lookups related to the name. As a work around for this survey I pull the label based on the name below so the user knows what they are selecting... Or you can turn off autocomplete. Screen below are record 1 of the repeat followed by record 2 of the repeat. I have this issue in roughly 60 surveys. Thanks, Larry

‎01-25-2022

Hi Doug, I have a small repeat that I am trying to do this with, would you be able to share the javascript for pulling the value for the same attribute name from the previous position in the repeat? Thanks, Larry

‎12-20-2021

Hi All, I would like to confirm that I am not doing something wrong and have found a bug with dynamic hint values. I have created a very basic survey with different combinations of hard coded and dynamic label and hints, as well as hard coded guidance_hints. I have hit 2 issues: 1) Annoying - If I have a dynamic hint ,the light bulb for a guidance hint always shows up and has the same value as the hint. (example 4 and 5 below) 2) Broken - If I have a dynamic hint and a hard coded guidance_hint, the dynamic hint will not display, but the correct guidance_hint is linked to the light bulb. (example 6 below) This is using Survey123 Connect 3.13.251 on a Windows 10 64-bit install. Thanks, Larry

‎11-02-2021

Thanks Doug, your solution and looking at what we had found an issue with missing .. and tightened up out nested repeats by adding the position(${repeatname})! THANKS!

‎10-29-2021

Hi All, I am having a problem with a very dynamic survey where the position it returning a wrong value in a nested repeat when retrieving a survey from the Inbox. I have attached my survey supporting lists and a screenshot walkthrough of the issue... All data is in the service properly, but the windows/android 3.13.234 and iOS 3.14.182B clients have all shown the problem. Thanks, Larry

‎09-22-2021

Hi All, I have some static images that I display for reference purposes. In 3.13 I get my image with another invalid symbol below it: The image is a simple png referenced as a read only image type in the media::image cell. It is on a grid display w2 with each image a w1. I have attached the images for reference. Thanks, Larry

‎09-22-2021

I have just upgraded to 3.13 and existing surveys that were fine 3.12 collecting a image signature are now capturing an image where the top left quadrant of the image is the signature, but the other 3 quadrants of the image are black. This makes it generally very hard to work with, especially for the feature reports... Thanks, Larry

‎06-23-2021

@PhilipWilson, Anyone, Any comment on this? Am I going down a bad path?

‎06-18-2021

Hi All, I have looked for previously, and seen others ask for the ability to pull in the values for objectid, Creator, CreationDate, Editor and EditDate from an Inbox survey. I ran across a post recently (can't find it again), but it pointed me to using a note field with the name set to whichever field you want to pull and in, a label and the bind::esri:fieldType set to null. This works great, I get all the values pulled into my survey to use, but not edit... Perfect. (Connect V3.12.232) The issue I now have is that these field no longer appear to be usable in the Feature Report for the survey. When I generate a sample template for the survey, the Creator is in the template. When I try try to upload the template I get "Error: An error occurred when checking the report template. Failed to parse ${Creator} since field name or parameter Creator cannot be found in the current parsing scope." I have used all of the mentioned fields in the reports previously... Any direction helpful! Thanks, Larry

‎06-09-2021

Thanks for the quick reply! I have put in this functionality almost exactly as you have described, but the reason I asked to be opened in view mode, is that you can't make the ${Survey status} = ‘completed’ read only within the survey, which then allows the any user to open from the inbox and change the ${Survey status} = ‘inprogress’ and proceed to change the values again, which can undo changes a quality review may have done... My current solution is that I have another field that I mark as locked or unlocked, a post process see the completed status and set the locked attribute. A QA user can then edit as required and if need be unlock and set back to inprogress if additional field work is required. The only gotcha is that the post process is on a 4 hour schedule so there is a time gap where things could get edited when we don't want it edited... I am tring to get PowerAutomate authorized corporately to close this gap. My other solution was to ask if there is a way to force it open in View mode... Larry

‎06-08-2021

Hi All, Is there a way to open an Inbox survey from the map or list in Edit or View mode based on the username, or possibly any attribute in the survey itself? We have a set of Quality Reviewers on our surveys that open/edit surveys once the field users set them to a completed state. I would still like the field users to be able to open the surveys from the inbox, but only in View mode. Thanks, Larry

‎05-19-2021

Thanks Doug, I was able to get the behavior I wanted using the body::esri:visible. I always require at least one entry in the repeat so it works out perfect. Thanks Again!

‎05-17-2021

Hi All, @PhilipWilson (similar questions) I have a survey defined with a setting of pages, then a repeat with an appearance or field-list and a relevant case that is not met until the user makes a select on the first page of the survey. When the user fills out the data to make the repeat relevant, the repeat always starts in minimal mode, I would like it to start as it would is the appearance had no value (expanded) as I present the user several options on the screen that they are required to select at least one. I have tried putting the repeat (no appearance) in a group (field-list) with the same results. I am looking for a way to not have the repeat minimal when it becomes relevant. I have attached a sample, remove the relevant statements to see the differences. Thanks, Larry

‎01-18-2021

Thanks for you help Phil, for now users will need to trigger the new (null) geopoint manually. I am storing the lat/lon in attributes as you suggested, thanks Again! Larry

Online Status	Offline
Date Last Visited	‎08-17-2023 09:08 PM

My Ideas

Latest Contributions by LarryWiebe

Re: Select_one appearance autocomplete in repeat displays name, not label from Inbox on repeat record 2-n

Select_one appearance autocomplete in repeat displays name, not label from Inbox on repeat record 2-n

Re: Have a repeat in survey123 default to last record entered

Dynamic Hint Issues

Re: Nested Repeat Position Issue retrieving from Inbox

Nested Repeat Position Issue retrieving from Inbox

Survey123 3.13 image for static display has invalid symbol

Survey123 image question signature appearance has extra background

Re: Editor Tracking Fields and objectid in Inbox Survey

Editor Tracking Fields and objectid in Inbox Survey

Re: Open Inbox Survey in Edit or View based on username or other survey data value

Open Inbox Survey in Edit or View based on username or other survey data value

Re: S123 repeat always starts minimal after satisfying relevant

S123 repeat always starts minimal after satisfying relevant

Re: Automatic geopoint update when opening an Inbox Survey

Automatic geopoint update when opening an Inbox Su...

Select_one appearance autocomplete in repeat displ...

Dynamic Hint Issues

Re: Nested Repeat Position Issue retrieving from I...

Survey123 image question signature appearance has ...