POST
|
Robert, I'll look into the adapter. As for the port they ArcGIS server and Web Server are the same machine. Thanks for the suggestions. Tim
... View more
12-04-2013
05:13 AM
|
0
|
0
|
277
|
POST
|
I checked out that documentation but am still somewhat confused what my crossdomain file needs to direct. Depending on what you mean by "you need to be sure that the url you are using is the fully qualified url" I have that or that may be what i need to specify in the cross domain file. I'm unclear specifically what i need to indicate in the syntax. the domain http://preservationsearchwebgis.anth.umd.edu/.... is valid. The IIS was setup by the network administrator as i access the server remotely.. This was a fresh install of the server OS (by the network admin) and the ArcGIS Server software(by myself remotely). I know I had this problem several years ago but forgot to save the old crossdomain file to help see the syntax. Thanks for your suggestion. If you have any other ideas please let me know. Tim Goddard
... View more
12-03-2013
06:03 PM
|
0
|
0
|
277
|
POST
|
SO i have two services running on a newly install of ArcgIS server 10.1 running on Windows Server 2012. I have built an application with the Flex Application builder using both services. The application works fine from the server. However, if i try to access the application from outside the server it loads to the point of loading the first service and i get this error: Map Manager error AIA Basic Web layer failed to load: Fault code: Server.Error.Request Fault info: HTTP request error Fault details: Error: [IOErrorEvent type="ioError" bubbles=false cancelable=false eventPhase=2 text="Error #2302"]. URL: http://preservationsearchwebgis.anth.umd.edu:6080/arcgis/rest/services/AIA_Basic_Web/Mapserver?f=json I have read the forums and seen possible solutions of the crossdomain file which it is unclear for me what syntax i would need for the file. I have seen an issue of the service output directory i initially tried changing this but not sure if I changed it to the right place so no solution there yet. my application is at: http://preservationsearchwebgis.anth.umd.edu/flexviewers/AIAWebGIS/ Can anyone suggest an answer with example of syntax or where i need to put the proper files? Thank you in advance for your help. Tim Goddard.
... View more
12-03-2013
04:44 PM
|
0
|
4
|
488
|
POST
|
Robert, Its been a while since i last talked with you. I've got an application that im migrating over from flex 2.4 and your earlier esearch widget. I'm working on getting it to work the way i want while having to learn the new coding. I'm under a bit of a time crunch and was hoping you could point out what i need to fix. I've attached the following xml i'm working with. my problems are: in my layers that have attributes that i would like to be able to have hyperlinks to my coding is not working example "PHOTOLINKS" field should be a hyperlink. I've been reading the pdf about hyperlinks and such and am not getting it. When i do a graphical search the fields show the fully hyperlink but it does not link and it does not show the alias i tried creating. Also my text search syntax and coding is wrong as well. I would like then to be able to do a word search in the hyperlink field for any word in the hyperlink. If you can help me figure this out then i think i can duplicate this in my other layers. Thank you in advance for your help. Tim Goddard
... View more
12-02-2013
07:24 PM
|
0
|
0
|
373
|
POST
|
Thank you everyone, i was finally able to get it to work. The query function out of the rest services directory was a great help. Tim
... View more
04-19-2011
01:46 PM
|
0
|
0
|
369
|
POST
|
I'm been through the forums and some SQL references and can't quite get this to work. Not sure if it is my syntax or the structure of the data itself. I want to allow users to search the address field of the parcels data set. I want them to be able to enter a partial address and then the search do a wild card. Here is my latest version. If i search the entire value like in the example it returns the right record but not if i just type 46 or 46 CORNHILL or any sub variant. I have tried the different wildcard symbols % and * My data is just in a shapefile in the Arcmap document. Any suggestions would be appreciated. I have tried many variants but can't seem to get it quite right. Thank you. See below for the current definition in the esearch widget configuration.xml <layer> <enableexport>true</enableexport> <name>Parcels</name> <url>http://preservationsearchwebgis.anth.umd.edu:8399/arcgis/rest/services/AIA_Basic_Web/MapServer/11</url> <expressions> <expression alias="Parcel Address" textsearchlabel="Search by Address [ Example: 46 CORNHILL STREET]:">Upper(ADDRESS) like Upper('[value]*')</expression> </expressions> <graphicalsearchlabel>Use one of the graphical search tools to select Archaeology Reports</graphicalsearchlabel> <spatialsearchlayer>true</spatialsearchlayer> <titlefield>Parcels</titlefield> <fields all="true"> </fields> <linkfield></linkfield> Thank you . Tim
... View more
04-17-2011
02:58 PM
|
0
|
3
|
1282
|
POST
|
I have a flex viewer working now that both returns services on my arcgis server machine and some from the ArcGIS online servers. I want to add some from here: http://www.imap.maryland.gov/portal/services.asp There list of services has a mapserver url that says it is for Flex as they build a lot of applications on the flex architecture. I have failed to find info on the site other than connecting with Arcmap or arcexplorer. When i try to connect by placing the flex url in my config.xml file no data shows up but the service is listed in my TOC. Any ideas? IS my Crossdomain file open enough for this third location. Is there some special arrangement that is need from MAryland. I have an inquiry into their folks but am wondering if it is just a technical thing that i am missing when i try to set it up or if it is some aspect from their side and im just not seeing it documented. I tried 3 or 4 of there services and had no luck with any of them. Any idea or suggestions. If somebody could see if they can get it to work to verify if it is me or them, I would appreciate it unless someone from there is on this forum in which case i would like to talk with you. Thank you. TIm
... View more
04-14-2011
07:53 PM
|
0
|
2
|
498
|
POST
|
Does anyone know if and/how you could place Google Analytics code for a flex viewer application to track usage? Tim
... View more
04-01-2011
02:23 PM
|
0
|
7
|
1776
|
POST
|
Thank you bjorn for your input. The service now loads after correcting the syntax problems in the config.xml. The other problem i'm trying to learn how to deal with: What does anybody recommend as the best way to give user control over the layers within a service? I saw you can load each feature as an operational layer individually. or is their a better mechanism to load the entire service but give the user control over turning on/off feature layers. I saw different layer widgets but was not sure the best way to load the layer to work with these type of widgets. Anybody have a reccomendation for the best way to do hyperlinks? I have a point layer in the service that one attribute gives the hyperlink location of a corresponding photo. What is a way i can have people be able to hyperlink to the photo? Any advice? Thank you in advance. Tim
... View more
03-10-2011
05:42 AM
|
0
|
0
|
197
|
POST
|
I am new to the ArcGIS Flex viewer and learning on the fly. Thank you to Jon and the forum for helping with my earlier post of getting the viewer up and running. There is nobody at my academic institution that has the expertise to help with my questions So here is my problem now. I have been playing with tweaking the viewer and learning how to config the config.xml. I am fine with widgets and the basic title and cosmetic changes. I am working on a single server so I do not think the crossdomain.xml is an issue but i have read only a little about this. I tried making the crossdomain.xml not sure if it right but the default viewer worked before i started tweaking things. I have not been successful in loading a service that i have created through ArcGIS server Manager. The viewer loads fine just not the layer i create. I have problems at the Server/network level as well that im not sure if they are effecting my issue as well. The service seems fine as far as I can tell, I have also made web applications in the manager as well to test the service. I can view the web app internally on server, but the data does not seem to load if i try to access the web app over the internet. The tools and legend and template load, the list of layers load but no geometry or images load. So my first question is could this problem effect the use of a service through the flex viewer? IF not here are lines of thought i have explored with the flex viewer. The projection of the data in my service is wkid 2248. I have tried removing all arcgis basemap layers and just load my service. I have tried not giving an extent to the map because i read that the viewer would take the coordinate from the first basemap layer (which is my service as i have no other layers loading). I have tried creating an initial extent pulling the info from the rest directory and specifying the wkid. Still no luck. I also am not sure if my syntax is always right. I understand the concept of the structure of the config.xml but am not always sure that i have the context right. I have tried between a dynamic layer and wms. I have made my service also a WMS and tried changing the url to the WMSServer but still no luck. if i am changing to dynamic or WMS do i only need to change the type and/or the URL? I also am confused about the "/rest/" in the URL. The URL when i look at my service in the ArcGIS Server manager does not have rest in it. But I do see the rest interface listed for any of my services under the Services Directory listing. SO I am unclear how this translates in the config.xml I have tried the URL with and with out the rest directory in it. Still no luck. So I am sure there is a lot that i have missed in my understanding as i am learning this on the fly. But I am hoping someone can help me understand a logical deduction method of solving where my problems could be. I have attached my latest config.xml in a zip file. You can reach the viewer addressed with the attached config.xml at http://preservationsearchwebgis.anth.umd.edu/flexviewer/ thank you for your help. Tim
... View more
03-09-2011
11:54 AM
|
0
|
4
|
403
|
Online Status |
Offline
|
Date Last Visited |
11-11-2020
02:23 AM
|